PHNE Preheater for PCBs up to 11x7cm (4" x 3")

PHNE Preheater for PCBs up to 11x7cm (4" x 3")

Vendor
JBC Tools
Regular price
$1,800.00
Sale price
$1,800.00
Regular price
Sold out
Unit price
per 

Indispensable for avoiding thermal shock on multilayer PCBs while reworking.

It is a complete solution to rework small PCBAs, such as the ones commonly used in smartphones. It features a heating area of 108 x 70 mm / 4.25 x 2.75 in.

Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.

It features three work modes:

Power Mode allows working at a fixed power level with the option of using protection thermocouple.

Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.

Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles.

Two thermocouples can be connected in any of the three work modes.
 

REFERENCES

PHNE-1A 120V

PRODUCT COMPOSITION

1 - Instruction Manual
1 - Heater unit
1 - Console
2 - PH218 Thermocouple Type K
1 - PH217 Kapton Tape

SPECIFICATIONS

Peak power - 300 W
Selectable temperature - 50 to 250 ºC / 120 to 482 ºF
Heating area - 108 x 70 mm / 4.25 x 2.75 in
Type K TC connector - 2 for Control & Protection
Profiles - 20 (up to 6 steps for each)
Set temperature profiles - 3 profiles (2, 3 or 4 steps)
Maximum work time -50 min or indefinite
ESD safe - Meet ANSI/ESD S20.20-2021
USB-A - Firmware update
              Graphics and profiles
USB-B - PC communications
Robot connector - Remote control
Aux. connector - Console connection
Pedal connector - Connect a pedal (ref. P-005) to control the heater

WEIGHT AND DIMENSIONS
PreHeater Unit - 179 x 165 x 42 mm / 1.20 kg.
                            7.05 x 6.50 x 1.65 in / 2.65 lb.
Package - 280 x 280 x 164 mm / 2.30 kg.
                 11.02 x 11.02 x 6.46 in / 5.07 lb.