Indispensable for avoiding thermal shock on multilayer PCBs while reworking.
It is a complete solution to rework small / medium PCBAs, such as the ones commonly used in electronic industries. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.
Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.
It features three work modes:
Power Mode allows working at a fixed power level with the option of using protection thermocouple.
Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.
Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles.
Up to four thermocouples can be connected in any of the three work modes.
REFERENCES
PHSE-1B 120V
PRODUCT COMPOSITION
1- Heater unit
1- Console
2- PH218 Thermocouple Type K
1- PH217 Kapton Tape
SPECIFICATIONS
Peak power - 800W
Selectable temperature - 50 to 250ºC / 120 to 482ºF
Heating area - 65 x 135 mm / 2.6 x 5.3 in - 1 zone
130 x 135 mm / 5.1 x 5.3 in - 2 zones
Type K TC connector - 4 for Control & Protection
Profiles - 22 (up to 16 steps for each), 3 preset profiles
Maximum work time - 50 min. or indefinite
ESD safe - Meet ANSI/ESD S20.20-2021
USB-A - Firmware update
Graphics and profiles -
USB-B - PC communications
Robot connector - Remote control
Aux. connector - Console connection
Pedal connector - Connect a pedal (ref. P-005) to control the heater
WEIGHT AND DIMENSIONS
PreHeater Unit - 195 x 288 x 42 mm / 2.77 kg.
7.68 x 11.34 x 1.65 in / 6.10 lb.
Package - 368 x 368 x 125 mm / 3.51 kg.
14.49 x 14.49 x 4.92 in / 7.73 lb.