Indispensable for avoiding thermal shock on multilayer PCBs while reworking.
This is used for preheating big-sized PCBAs such as communications boards, airplanes, etc. and ideal for repetitive soldering jobs. It features a heating area of 510 x 610 mm / 20.07 x 24 in. with 6 independent work zones (255 x 203 mm / 10.04 x 8 in) to be switched on/off.
Matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged.
It features three work modes:
Power Mode allows working at a fixed power level with the option of using protection thermocouple.
Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples.
Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles.
Up to eight thermocouples can be connected in any of the three work modes.
REFERENCES
PHXLE-1A 120V
PRODUCT COMPOSITION
1 - Heater unit
1 - Console
3 - PH218 Thermocouple Type K
1 - PH217 Kapton Tape
SPECIFICATIONS
Peak power - 5400 W
Selectable temperature - 50 to 250 ºC / 120 to 482 ºF
Heating area - 255 x 203 mm / 10.04 x 8 in - 1 zone
510 x 610 mm / 20 x 24 in - 6 zones
Type K TC connector - 8 for Control & Protection
Profiles - 22 (up to 16 steps for each)
Set temperature profiles - 3 profiles (2,3 or 4 steps)
Maximum work time - 50 min or indefinite
ESD safe - Meet ANSI/ESD S20.20-2021
USB-A - Firmware update
Graphics and profiles
USB-B - PC communications
Robot connector - Remote control
Aux. connector - Console connection
Pedal connector - Connect a pedal (ref. P-005) to control the heater
WEIGHT AND DIMENSIONS
PreHeater Unit - 790 x 664 x 42 mm / 6.90 kg.
31.10 x 26.14 x 1.65 in / 15.21 lb.
Package - 1200 x 800 x 374 mm / 55.00 kg.
47.24 x 31.50 x 14.72 in / 121.25 lb.